The Franzis kit in original retro look is light and can be assembled with lot of craft fun. High quality components, good sensitivity and a telescopic antenna provides for best wireless reception. The radio kit with board and all additional components - are easy and quick to assemble! This packet contains all the necessay components Reception range: 87.5 MHz to 108 MHz.
Go on hunting stations as it was 50 years ago. Channels from London, Rome, Moscow and Budapest, stations from China, Korea, India or Africa, you can receive them all with this radio. Like that time, you have to adjust not only the frequency and volume, but even the feedback with sensitivity to get the most out of the device. And best of all, you have built it yourself! The radio kit with board and all components for insertion and soldering - light and easy to assemble! This packet contains all the necessay components
Go on 'wave hunt' like about 80 years ago! With the nostalgic retro radio-kit from high-quality components you can receive transmissions from the whole world. The kit can be simply built up by means of sticks and soldering bolts.
The Rock n Hopper or pogo ball became a craze in the 80's and anyone from that era will remember bouncing around on one. 35 cm. Suitable for ages 8 years and up.
Jersey is this season's hot ticket. This dress with wet-look collar and insets features a retro style with slightly flared 3/4 sleeves and tailored panels.
Seamless design with ruched detail at the bust. A perfect fit with smart logo trim to streamline your silhouette for any occasion. This shapewear cami from TRIUMPH provides great bust support and smoothes your tummy.
This bra set features a retro dotty design with seamless cups, adjustable elasticated straps and a matching hipster thong. This T-shirt bra creates a great shape under tight fitting clothing.
This highly addictive retro like puzzle improves your concentration and dexterity. To master the addict-a-ball you must guide your ball through an array of challenges, over platforms, through arches and down holes, meaning you must twist and turn the ball in order to reach your goal.
This lace ruffle thong short is finished with a satin bow exuding sexy retro style. Made from soft micromesh, this romantic thong short is available in white and black.
The retro-reflective sensor uses a reflector, and can detect objects with reflective surfaces. Due to the integrated suppressor two devices can be installed directly next to each other With sensitivity adjustment. Two LEDs (yellow and green) indicate the output state and stability of detection.
The retro-reflective sensor uses a reflector, and can detect objects with reflective surfaces. In addition to the normal operation, the pick-off delay and wiper function using a rotary switch (time range of 0.1 to 5 s). Due to the integrated suppressor two devices can be installed directly next to each other With sensitivity adjustment. Two LEDs (yellow and green) indicate the output state and stability of detection.
With the tube radios on world reception Make your own radio, combining the new and old technique together. The tubes works for strong reception and for the tube radios typical plesant sound. A modern Audio-IC and high class loudspeaker works for optimal volume. With this tube radio you can catch stations from all over the world. In fact you can also receive the ham-radio with this device. The tube radio has strong reception a modern world receptor. You can let yourself carried -off in the good old times, as to make your own radio normally. This packet contains all the necessay components
The rims fit perfectly with all Retro Style vehicles and harmoniously with the Vintage tyres. The rims are based on the design of earlier times and lend a special note to each model
The wheels fit perfectly with all the retro style vehicles, and fit perfectly with the vintage tires. The rims are modelled on the design of earlier times and give each model a distinctive look.
The rims fit perfectly with all Retro Style vehicles and harmoniously with the Vintage tyres. The rims are based on the design of exact original tyres of the earlier times and lend a special note to each model
The rims fit perfectly with all Retro Style vehicles and harmoniously with the vintage rims. The rims are based on the design of exact original tyres of the earlier times and lend a special note to each model
A professionnal in the compact form with the announced, bold and impressive analogue sound! Handling the device is child's play. Quite simply anybody can create the wildest sounds within seconds thanks to its intuitive user interface. The array of easy-to-edit settings provides enormous creative freedom. In addition to the synthesiser sounds incl. FX station, the microKORG also houses an instantly-usable vocoder (goose-necked mic also included) incl. vocoder presets. This means the legendary vocoder effects are made available for vocals and other audio signals without having to fiddle around with the device. Not forgetting the microKorg's delightful visual properties- its authentic retro design, including nostalgia-inducing wooden sides and metallic vintage potentiometers.
Single CD/MP3 player in the tested Mc Crypt quality at a competitive price Connect an external hard disk, USB stick, SD card or even go retro and insert a CD.
The Albrecht DR 80 is an FM and a DAB / DAB+ radios in the modern retro design. DAB / DAB+ excited by the crystal clear sound of digital music transfer and it achieves the listener much more information than in the RDS process. For both radio areas 8 station memory each is available The DR 80 can be operated with 230 V or 6 AA batteries and is also ideal for travelling or on the way.
The reflection HRA-4050 is a true genius in retro design. It easily allows the process of transforming music cassette via USB or SD / MMC card into MP3 format. But other than the AUX input (cinch) connected devices are supported for direct encoding. But that's not all: even music from your favourite radio station can be recorded from a USB memory stick, SD / MMC card, via auxiliary input or from microphone directly to cassette - quickly, easily and without a PC. Almost a matter of course is to play your existing MP3 music through the UBS port or the SD / MMC card. Also available with programmable track playback and repeating any or all titles.
The reflection HRA-4050 is a true genius in retro design. It easily allows the process of transferring music cassette via USB or SD / MMC card into MP3 format. But other than the AUX input (cinch) connected devices are supported for direct encoding. But that's not all: even music from your favourite radio station can be recorded from a USB memory stick, SD / MMC card via auxiliary input or from microphone directly to cassette - fast, easy and without PC. Almost a matter of course is to play your existing MP3 music through the UBS port or the SD / MMC card. Also available with programmable track playback and repeating any or all titles.
The retro-reflective sensor uses a reflector, and can detect objects with reflective surfaces. Due to the integrated suppressor two devices can be installed directly next to each other With sensitivity adjustment. Two LEDs (yellow and green) indicate the output state and stability of detection.
The retro-reflective sensor uses a reflector, and can detect objects with reflective surfaces. In addition to the normal operation, the pick-off delay and wiper function using a rotary switch (time range of 0.1 to 5 s). Due to the integrated suppressor two devices can be installed directly next to each other With sensitivity adjustment. Two LEDs (yellow and green) indicate the output state and stability of detection.
Cottages & Bungalows Magazine is the must-read for the owner and enthusiast of small historic homes from the 1890's through 1950's as well as any home owner who wants to create the cottage lifestyle in a contemporary home. Cottages & Bungalows Magazine includes design elements from traditional Craftsman bungalows to English Tudor cottages, and from lake-side retreats to log cabins. Inside each issue of Cottages & Bungalows Magazine you'll find detailed how-to articles, historic floor plans, restoration features, articles on cottage gardens, kitchen & bath, retro-chic accessories, Mission-style furniture, feature length home-tours and advice from preservation experts. Cottages & Bungalows Magazine offers ideas, inspiration, and practical advice to the small-home owner.
Oscillating table fan in trendy retro design with glossy chrome protective grid and applications. Provides a pleasant and highly efficient cooling. Stable, tilt-resistant base with rubber feet.
Oscillating table fan in trendy retro design with glossy chrome protective grid and applications. Provides a pleasant and highly efficient cooling. Stable, tilt-resistant base with rubber feet.
Oscillating table fan in trendy retro design with glossy chrome protective grid and applications. Provides a pleasant and highly efficient cooling. Stable, tilt-resistant base with rubber feet.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
XBright® LEDT8i tubes replace conventional fluorescent tubes in the Retro- fit range. They offer increased reliability compared to conventional retrofit products, a simpler retrofitting and a higher effectiveness. XBright® LED tubes are very reliable, because they are equipped with high-quality SMD LEDs with excellent light yields and very low power dissipation. They are installed in a special aluminium casing and on a special PCB (power circuit board ) and, therefore, experience almost no self-heating. This enables the extremely long operating life of XBright® LED T8i tubes. A special loop circuit prevents total failure of the tubes if an LED failure occurs. Special aluminium casing The XBright® T8i LED tubes make use of a special aluminium casing. With many models available on the market, PVC is used. This can easily lead to an overheating of the LEDs and cause a drastic fall in the operating life. XBright® LED tubes have a very light aluminium case. The mounting plate with the LEDs is located directly on the milled aluminium and its heat can directly dissipate to the outside. Therefore, the temperature in the work area of the LEDs and the operating life is significantly increased.
